- 5GHz 11AC 433Mbps
- IP64 waterproof enclosure
- 16dbi directional antenna
- AP,Station,WISP etc operating mode supported
- Up to 60 meters of flexible deployment with included PoE Injector
AP625 adopts of 11AC technology and gigabit ethernet port to boost the throughput performance on the wireless connection.
AP625 is specially designed for outdoor long range point to point application scenarios. Adopt of external power amplifier and 16dBi antenna to achieve 5km+ wireless data transmission range.
AP625 comes with an operating mode switch, you can switch the device to work as AP mode or Station mode without login to web UI. When one works as AP mode and another works as Station(Client) mode, you can bridge two devices together at a push of Bridge/RST button.
3 signal LED Lights represent the currently signal strength that AP625 receives from peer device.It is helpful to find the right location to deploy the device and achieve a better performance.
AP625 adopts of specific antenna array and metal reflector to deliver higher gain and optimized transmission quality.
Equipped with IP64 waterproof enclouse and 6kv lightning protection capability, AP625 can work in various weather conditions, such as sunshine, rainfall, wind, snow or extremely low/high temperature environment
Long-Distance Wireless Connection
One work as AP mode and another work as Station mode to create a long distance wrieless connecton for video surveillance and data transmission.
Wirelessly connect to WISP station/hotspot to share Internet to local wireless and wired network.
Link multi AP in a network, all the associated client can communicate with each other.
AP625 comes with a centralized management software that helps users easily to manage all the devices in the network from a single PC-CPE Controller.
|Maximum wireless speed||433Mbps|
|CPU Processor||Broadcom 900MHz|
|Interface||1*GE PoE/WAN/LAN port|
|Mode Switch||STA: The device only work in Station mode|
Off: The device work on AP/Station/Universal Repeater/WISP/Router mode
AP: The device only work in AP mode
|Button||Reset: Press 15 seconds or more to restore to default settings|
Bridge: Press 3-7 seconds and release it to bridge uplink AP
|Antennas||16dbi Directional Antenna|
|Antenna Beamwidth||Horizontal: 30°|
|Maximum Power Consumption||9W|
|Power Supply||24v 0.5A PoE Injector|
|Operating mode||AP/Station/Universal Repeater/WISP/Router|
|Compliant Standards||IEEE 802.11ac/n/a|
|Wireless Features||Enable/Disable Wireless Radio|
Wireless Client isolation
Wireless Access Control
Wireless Client list
|Wireless Security||64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2|
|Transmission Power||Adjustable power by 1dBm|
|Receiver sensitivity||MCS0: -90dbm |
|DHCP Server||DHCP Server |
|Remote Web access||Support|
|Network Diagnoses||Ping, Traceroute, Signal Scan|
|Management Tool||Time&Date Setting|
|Managed By Controller||PC Software -- CPE Controller|
|Package Contents||5G 433Mbps outdoor Point to Point CPE AP625|
Two Plastic Staps
Quick Installation Guide
|Operating Temperature||-20℃ ~ 55℃|
|Storage Temperature||-40℃ ~ 70℃|
|Operating Humidity||10%~90% non-condensing|
|Storage Humidity||10%~90% non-condensing|
|Default login IP||192.168.2.1|
|Default Login Username||admin|
|Default Login Password||admin|
1.Fixed some bugs.
1.This firmware is only fit for AP625 and its firmware version must be in V1.0.0.xx .
2.Incorrect upgrade will damage your device.
3.Do not power off the device when upgrading.
4.Please unzip the file you downloaded and use the file ended with "bin" or "trx" to upgrade your device.