CPE9 Datasheet  
CPE9 User Guide  
CPE9 Installation Guide
CPE9 Firmware V1.0.0.9(4819)_EN

Instructions

Upgrade Notes:

1.This firmware is only fit for CPE9v1.0 and its firmware version must be in V1.0.0.XX or more.

2. Do not power off the device when upgrading.

3. Please unzip the file you downloaded and use the file ended with "bin" or "trx" to upgrade your device.

4. Please reset it to factory settings after upgraded it.


Release Notes:

1. Solved the issue that Client Mode will reboot wireless module randomly while point-to-multiple point.

2.Solved the issue that there is no 11b/g/n and cannot save 40MHz bandwidth on P2MP/Repeater Mode.

3.Solved the issue that Security Mode cannot save on P2MP/Repeater Mode in CPE Management Software.

CPE9 Management software
CPE9 Firmware V1.0.0.7(4650)_EN

Instructions

Upgrade Notes:

1.This firmware is only fit for CPE9v1.0 and its firmware version must be in V1.0.0.XX or more.

2.Do not power off the device when upgrading.

3.Please unzip the file you downloaded and use the file ended with "bin" or "trx" to upgrade your device.

4.Please reset it to factory settings after upgraded it.


Release Notes:

1. Solved the issue that cameras will be offline when switch AP mode to Client mode for several times.

2. Solved the issue that packages will be copied in Transparent mode.

CPE9 Firmware V1.0.0.5(3975)_EN

Instructions

Notes:

1.This firmware is only fit for CPE9 and its firmware version must be in V1.0.0.XX or more.

2.Do not power off the device when upgrading.

3.Please unzip the file you downloaded and use the file ended with "bin" or "trx" to upgrade your device.


Update:

1. Disable SNTP defaultly.

2. Disable UPNP defaultly.

3. Allow to pass through multiple VLAN.

4. Solved issue that Client mode cannot connect AP mode while WiFi encrypted.


CPE9 Firmware V1.0.0.2(2233)_EN

Instructions

1.Incorrect upgrade will damage your device.
2.Please upgrade your device by cable connections.
3.Do not power off the device when upgrading.
4.Please unzip the file you downloaded and use the file ended with "bin" or "trx&qu
CPE9 HD Image
CPE9 CE v1.0
No data downloaded