F1118P-16-150W  Specification
Standard&ProtocolIEEE 802.3、 IEEE 802.3u、IEEE 802.3x、IEEE 802.3af
MTBF≥100,000hours
Indicator16*Link/Act per device
1*G1 Link/Act  per device
1*SFP Link/Act  per device
1*PoE-MAX per device
1*Power per device
Interface16 10/100Base-TX ports(Data/Power)
1 10/100/1000Base-T port(Data)
1 1000Base-X SFP port
Port Lightning Protection6KV
Store and forwardYes
Exchange Capacity7.2 Gbit/s
Packet forwarding rate5.36Mpps
MAC Address Table4K
PoE supply managementPort 1 to Port 16 support  IEEE802.3at/af POE standard
PoE through pin1 2 4 5 +,3 6 7 8 -
Voltage input rangeAC:100-240V~ 50/60Hz
Dimensions294*178*44mm( W x D x H )
Power Consumptionin full configuration:<150W
PoE Max Power Supply:135W
Port FeaturesCCTV: 1-8 ports based CoS, If multiple IP cameras are connected to the switch, you are recommended to enable this mode and connect the G1 or SFP1 port of this switch to the upstream device to which the monitoring computer connects. This ensures smoother monitoring video playback.
Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other.
VLAN: In this mode,1-16 ports of the switch cannot communicate with each other, but can communicate with the G1 and SFP1 ports.Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing。
Extend: In this mode, the data rate of 1-8 port of the switch is limited to 10 Mbps, whereas the maximum transmission distance of the port is increased to 250 meters. All the ports of the switch can communicate with each other.
EnvironmentOperating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing