F1110P-8-102W  Specification
StandardIEEE 802.3、 IEEE 802.3u、IEEE 802.3x、IEEE 802.3af、IEEE 802.3at
MTBF≥50,000 hours(about 5 years)
IndicatorsLink/Act, PoE Status, Power, 1000M
Fixed Ports8个10/100Base-TX RJ45 Ports(Data/Power)
2个10/100/1000Base-T RJ45 Port(Data)
lightning protection6KV
Wire-speed forwardingSupport
Switching capacity5.6 Gbit/s
Mac Address Table4K MAC
PoE SupplyPort 1 to Port 8 support standard IEEE802.3at/af power( maximum power for each port is 30W),PoE power type is end-span(1245+, 3678- line pair)
in full configuration:<102W
PoE Max Power Supply:99W
Dimensions177.5mm*104mm*26mm (W × D × H)
Input VoltageAC:100-240V~ 50/60Hz
DC:51V /2.1A (Power Adapter )
EnvironmentOperating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
One-key ModeDefault Mode: If Default mode is enabled, the device works as a general switch and all ports support 10/100Mbps auto-negotiation.
VLAN Mode: 1-8 port can be isolated each other but 1-8 port can connect to 9/10 port  after open VLAN to stop broadcast storm to increase forwarding rate of  frame.
Extend Mode: If Extend mode is enabled, VLAN isolation is enabled. Port 1-4 will be isolated respectively (10Mbps auto-negotiation), but can communicate with the Uplink port. And the delivery distance of powering and network data is up to 250m (10Mbps).
Certification3C、FCC、CE、RHOS