- Support 24 GE Ports and 2 SFP Slots
- Support unique smart zone
- Provide full wire-speed switching
- Support L2 Link protection technology
Built-in switching power adapter and designed with 1U steel case
19-inch-rack-construction Switching bandwidth up to 56Gbps and each port forwarding rate up to 1488095pps
Support 8K MAC address list
Support jumbo frame forwarding
Support formation of broadcast storm
Support QoS and DSCP,Cos(802.1P) priority, each port provides 4 priorities for forwarding queue
Support 802.1Q VLAN and maximum groups of QVLAN up to 200
Support IGMP snooping function
Support 802.1x authentication based on port
Support Telnet, CLI, Web and SNMP, system log, TFTP&HTTP for upgrading firmware
Support STP, RSTP, IGMP Snooping V1&V2, full-deplux 802.3x flow control and half-duplux backpressure flow control
Support spanning tree protocol(STP), including 802.1d(Spanning Tree) and 802.1w(Rapid Spanning Tree) protocol
Support Link Aggregation, including static Link Aggregation and LACP. Support 6 Trunk groups and 8 aggregate ports per group
Support defending from ARP attacks, worm-virus attacks, Dos attacks, MAC-address attacks Support quaternary-smart-binding, searching mainframe for smart binding
Support smart configuration for network bar and enterprise.
Support firmware upgrading ways of TFTP in CLI and HTTP in Web.
|Description||10/100/1000 Smart Switch|
|Login IP address||192.168.0.1|
|User name\Password||For administrator: admin\admin|
|For user: user\user|
|Standard and protocol supported||IEEE 802.3、IEEE 802.3u、IEEE 802.3z、IEEE 802.3ab、IEEE 802.3x、IEEE 802.1D、IEEE 802.1W、IEEE 802.1Q、IEEE 802.1p、IEEE 802.1x、IEEE 802.3 NWay、SNMP|
|Forwarding mode and capacity||Linear-speed forwarding up to 48Gbit/s|
|MAC Address entries||8K|
|Relative Humidity(Operational)||10%～90% RH（noncondensing）|
|Relative Humidity(Storage)||5%～95% RH（noncondensing）|
|Power Supply||AC 100～240V 1.2A(Max) 50～60Hz|
|Port & Module||24 GE Port and 2 SFP(combo)|
|Indicators||POWER; SYS; LINK/ACT; SPEED; SPF|
|Connector and cabling||CAT 5e|
|1000Base-SX: MMF(Multimode fiber)， 1000Base-LX：SMF（Single-mode fiber）|
1.This firmware is only fit for G3224Tv1.0.
2.Do not power off the device when upgrading.
3.Please unzip the file you downloaded and use the file ended with "bin" or "trx" to upgrade your device.
4.Please reset it to factory settings after upgraded it.
1.Solved the issue that DHCP snooping will filter the normal packages when there are illegal DHCP NAK packages.
2.Solved the issue that STP will hang when it receives the illegal BPDU packages.
3.Solved the issue that switch cannot save multiple link aggregation groups.
4.Solved the issue that cannot work when enable STP/RSTP and Link Aggregation at the same time in network.
5.Solved the issue that MAC address shows incorrect from link aggregation port.