- 2.4GHz 11n 150Mbps
- 12dbi directional antenna
- IP64 waterproof enclosure
- 6000V Lightning Protection
- AP,Station,WISP operating mode supported
- Up to 60 meters of flexible deployment with included PoE Injector
CPE9 adopts of independent power amplifier and 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 5km.
CPE9 adopts of auto-bridge technology,two cpe can connect to each other when you power on them face to face. It is very easy to setup.
Long-Distance Wireless Connection:
One work as AP mode and another work as Station mode to create a long distance wrieless connecton for video surveillance and data transmission.
Wirelessly connect to WISP station/hotspot to share Internet to local wireless and wired network.
3 signal LED Lights represent the currently signal strength that CPE9 receives from peer device.It is helpful to find the right location to deploy the device and achieve a better performance.
Equipped with IP64 waterproof enclouse and high quality hardware design, CPE9 can work in various weather conditions, such as sunshine, rainfall or extremely low/high temperature environment.
CPE9 comes with a centralized management software that helps users easily to manage all the devices in the network from a single PC-CPE Controller.
|Application Scenarios||WISP CPE, Data transmission and Long range video surveillance|
|Maximum Wireless Rate||150Mbps|
|Interfaces||2*10/100Mbps Ethernet Port|
|Antenna Beamwidth||Horizontal: 60° Vertical: 30°|
|Power Consumption||Typical 4.3W, Peak 10.8W|
|Power Method||12V1A Passive PoE|
|Passive PoE||Passive power over ethenet via PoE/LAN (+4,5pins; -7,8pins)|
Voltage range: 11-13.8V DC
|Receiver sensitivity||MCS0: -96dbm|
|Operating mode||AP/Station/WISP/P2MP/WDS Repeater/Router|
|Compliant Standards||IEEE 802.11b/g/n|
|Enable/Disable Wireless Radio||Support|
|Wireless Client isolation||Support|
|Client Limitation For SSID||Support|
|Wireless Access Control||Support|
|Weak Signal Client Limitation||Support|
|Transmission Power||Adjustable power by 1dBm|
|Wireless Security||64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2|
|VLAN Tagging for SSID||Support|
|Remote Web access||Support|
|Network Diagnoses||Ping, Traceroute, Signal Scan|
|Managed By Controller||PC Software -- CPE Controller|
|Package Contents||1*5km Point to Point Outdoor CPE|
1*Quick Installation Guide
|Operating Temperature||-30℃ ~ 60℃|
|Storage Temperature||-40℃ ~ 70℃|
|Operating Humidity||10%~90% non-condensing|
|Storage Humidity||10%~90% non-condensing|
|Default login IP||192.168.2.1|
|Default Login Username||admin|
|Default Login Password||admin|
1.This firmware is only fit for CPE9 and its firmware version must be in V1.0.0.XX or more.
2.Do not power off the device when upgrading.
3.Please unzip the file you downloaded and use the file ended with "bin" or "trx" to upgrade your device.
1. Disable SNTP defaultly.
2. Disable UPNP defaultly.
3. Allow to pass through multiple VLAN.
4. Solved issue that Client mode cannot connect AP mode while WiFi encrypted.
CPE9 2.4GHz Outdoor CPE is designed to WISP CPE solutions and long distance wireless network solutions for video surveillance and data transmission. It features with 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network. Adopt of auto-bridging technology,two CPE can connect to each other automatically to make it easy to setup.