- 2.4GHz 11n 300Mbps
- 8dbi directional antenna
- IP65 waterproof enclosure
- AP,Station,WISP operating mode supported
- Up to 30 meters of flexible deployment with included PoE Injector
CPE3 adopts of auto-bridge technology,two cpe can connect to each other when you power on them face to face. It is very easy to setup.
CPE3 integrates with a 8dBi directional antenna to provide an optimized transmission quality.
Equipped with IP65 waterproof enclouse and high quality hardware design, CPE3 can work in various weather conditions, such as sunshine, rainfall or extremely low/high temperature environment
Long-Distance Wireless Connection
One work as AP mode and another work as Station mode to create a long distance wrieless connecton for video surveillance and data transmission.
Wirelessly connect to WISP station/hotspot to share Internet to local wireless and wired network.
3 signal LED Lights represent the currently signal strength that CPE3 receives from peer device.It is helpful to find the right location to deploy the device and achieve a better performance.
CPE3 comes with a centralized management software that helps users easily to manage all the devices in the network from a single PC-CPE Controller.
|Application Scenarios||Long range video surveillance,data transmission and WISP CPE|
|Maximum Wireless Rate||300Mbps|
|Waterproof Level||1*10/100Mbps PoE/LAN Port|
|Antenna Beamwidth||Horizontal: 60° Vertical: 60°|
|Max Power Consumption||2.6W|
|Power Method||DC or Passive PoE|
|Passive PoE||Passive power over ethenet via PoE/LAN (+4,5pins; -7,8pins)|
Voltage range: 9-12VDC
|Receiver sensitivity||MCS0: -92dbm |
|Compliant Standards||IEEE 802.11b/g/n|
|Enable/Disable Wireless Radio||Support|
|Wireless Client isolation||Support|
|Client Limitation For SSID||Support|
|Wireless Access Control||Support|
|Weak Signal Client Limitation||Support|
|Transmission Power||Adjustable power by 1dBm|
|Wireless Security||64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2|
|VLAN Tagging for SSID||Support|
|Remote Web access||Support|
|Network Diagnoses||Ping, Traceroute, Signal Scan|
|Managed By Controller||PC Software -- CPE Controller|
|Package Contents||1*2.4GHz 8dBi Outdoor CPE|
1*Quick Installation Guide
|Operating Temperature||-30℃ ~ 55℃|
|Storage Temperature||-40℃ ~ 70℃|
|Operating Humidity||10%~90% non-condensing|
|Storage Humidity||10%~90% non-condensing|
|Default login IP||192.168.2.1|
|Default Login Username||admin|
|Default Login Password||admin|
1.This firmware is only fit for CPE3 and its firmware version must be in V1.0.0.XX or more.
2.Do not power off the device when upgrading.
3.Please unzip the file you downloaded and use the file ended with "bin" or "trx" to upgrade your device.
1. Disable SNTP defaultly.
2. Disable UPNP defaultly.
3. Allow to pass through multiple VLAN.
4. Solved issue that Client mode cannot connect AP mode while WiFi encrypted.
1.Enable high power output feature.
2.Allow to save DNS address 0.0.0.0.
3.Fixed some bugs.
1.This firmware is only fit for CPE3 and its firmware version must be in V1.0.0.xx .
2.Incorrect upgrade will damage your device.
3.Do not power off the device when upgrading.
4.Please unzip the file you downloaded and use the file ended with "bin" or "trx" to upgrade your device.
CPE3 2.4GHz Outdoor CPE is designed to WISP CPE solutions and long distance wireless network solutions for video surveillance and data transmission. It features with 8dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network. Adopt of auto-bridging technology,two CPE can connect to each other automatically to make it easy to setup.