- Dual concurrent 2.4Ghz 802.11n/g/b and 5Ghz 802.11ac/n/a radios.
- Up to 1200 Mbps combined data rate.
- Support 802.3at PoE standard.
- Deployed with IP-COM access controllers, support captive Portal,etc.
With it sleek, low profile design and controllable LEDs, blends into hotel, office environments.
Supporting PoE standard , AP can integrates into your existing 802.3at power and network infrastructure.
Dual-band design deliver high-capacity and high-performance to new 802.11ac and legacy 802.11a/b/g/n clients. The 802.11ac Gigabit Wi-Fi along with Gigabit Ethernet enabling fast data forwarding without any bottleneck, is ideal for high-bandwidth applications such as streaming video, P2P download and gaming.
IP-COM AP support almost all the latest encryption and authentication mechanisms(such as WEP,WPA-PSK,802.1X,WEB Portal,Social login),make it simple for administrator to manage enterprise security and guest access.
Advanced RF optimization with automatic channel, band and power level selection, to reduce co-channel interference. AP can recognize various channels being used and automatically switch to the best available channel to provide the best experience for users.
Airtime fairness is an advanced scheduling technique that gives equal airtime to each client regardless of its theoretical data rate. This will ensure higher download speed and increases overall network capacity.
When the network start small, user can acquire the AP and set it to Fat mode. As the user grows and more devices are installed, it's recommended to add a IP-COM AC to simplify network management and centrally manage all AP. It can significantly reduces deployment and management effort by automating device provisioning, firmware upgrades and policy enforcement.
|Mounting||Ceiling and Wall Mount|
|Dimensions||200*200*30mm(W x H x L)|
|Application Scenarios||Medium-Sized Enterprise offices, Shopping Malls, and Restaurants etc|
|PHY Data Rates||1200Mbps|
|Wi-Fi Standards||IEEE 802.11n/g/b， 802.11ac/n/a|
|Interfaces||1*10/100/1000Mbps PoE/LAN port， 1*DC Power Jacket|
|Antennas||2x Integrated dualband, Omni-directional, 4dBi gain|
|Max Power Consumption||17W|
|LED Indicators||PWR, 2.4G，5G|
|Power Supply||DC Input: 12 VDC 1.5A|
PoE: 802.3at compliant
|Receiver Sensitivity||MCS0: -88dBm |
|WiFi Radio||Enable or Disable|
|BSSIDs||Up to 8 (2.4 GHz), Up to 4(5 GHz)|
|SSID hiding||Enable or Disable|
|Clients Limit||Connected user number limitation for every SSID|
|VLANs||802.1Q, 4094 VLAN IDs (1 to 4094) and SSID-based VLAN assignment|
|Power Save (APSD)||Support|
|Multicast to unicast Conversion||Support|
|Automatic Channel control||Support|
|Adjustable Power||Adjustable step by 1dBm|
|Access Control||Connect limitation based on mac address|
|Wireless Security||64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2|
|WiFi Client Association Status||Support|
|System Monitoring||Status Statistic and Event Log|
|Reset Device||Support from Web UI or AP Controller|
|Username Management||Support from Web UI or AP Controller|
|Firmware Upgrade||Support from Web UI or AP Controller|
|Centralized Management||Managed by AC2000, AC3000|
|Operating Humidity||10%－90% (non-condensing)|
|Storage Humidity||10%－90% (non-condensing)|
|Default Login IP||192.168.0.254|
|Default User Name||admin|
1.Modified the PA parameter.
2.Removed the virtual AC feature.
3.Modified the maximum number of clients.
1.This firmware is only fit for AP355 and its firmware version must be in V2.0.0.xx .
2.Incorrect upgrade will damage your device.
3.Do not power off the device when upgrading.
4.Please unzip the file you downloaded and use the file ended with "bin" or "trx" to upgrade your device.