W40AP Wireless N300 Ceiling Access Point

W40AP adopts independent power amplifier to enhance wireless signal for client devices, such as wireless laptops, tablets and smartphones. Compliant with 802.3af PoE, W40AP can be deployed in areas where power outlets are scarce or not available. Also, W40AP can be configured to work in Access Point/WDS/AP+Client mode.
Highlights
● 2.4GHz 300Mbps
● Ceiling Design
● Compliant with PoE 802.3af
● AP/WDS/AP+Client Mode

W40AP is a 300Mbps indoor ceiling access point for hotels, resorts, hospitals, office buildings, universities, and other multi-buliding campus that need to extend the network. With the mounting bracket provided, W40AP can be mounted easily on ceiling or wall.

W40AP adopts independent power amplifier to enhance wireless signal for client devices, such as wireless laptops, tablets and smartphones. Compliant with 802.3af PoE, W40AP can be deployed in areas where power outlets are scarce or not available. Also, W40AP can be configured to work in Access Point/WDS/AP+Client Repeater mode.

Ceiling Design

Featuring with ceiling design, W40AP can be mounted easily on ceiling or wall with the mount bracket.

Wireless N300 Speed

W40AP transfer rate up to 300Mbps on the 2.4GHz for faster file transfers and smoother video steaming.

Power over Ethernet (802.3af)

The port on the back panel is 802.3af capable, which allows both power and data to be carried over a single Ethernet cable to a W40AP. And the W40AP can be deployed in areas where power outlets are scarce or not available.

Industry Wireless Security

W40AP offers multi-level wireless encryption options to prevent unauthorized access and protect your important data.
1. 64/128bit WEP, WPA-PSK, WPA2-PSK, WPA&WPA2-PSK, WPA, WPA2
2. Wireless Access Control based on the MAC address of wireless adapter

Multiple Operating Mode

W40AP can be configured to work as Wireless Access Point, WDS, Universal Repeater mode and help you expand existing network.

Centralized Management

W40AP can be managed by the hardware Access Controller, the administrator can monitor, manage and control the APs more easily.

Hardware Feature
Dimension144.2*144.2*40.12mm
AP TypeFat AP
Interface1*FE LAN
Antenna2*printed antennas
Button1*Reset
Power Method802.3af PoE/DC 12V=1A
Maximum Power Consumption8W
EIRP<20dBm
LED IndicatorSYS
Software Feature
Compliant StandardIEEE 802.11n/g/b
Frequency Range2.4GHz-2.483GHz
Maximum Wireless Speed300Mbps
Wireless Basic Setting4 SSID
Enable/Disable Wireless Radio
Wireless Client isolation
Wireless Access Control
Wireless Client list
Wireless Security Setting64/128 WEP
WPA-PSK
WPA2-PSK
WPA&WPA2-PSK
WPA
WPA2
Working ModeAP,WDS,Universal Repeater
Maximum Concurrent Client15
Receiver Sensitivityb mode:1M -89dBm@8% 11M -87dBm@8% PER;
g mode:54M -74dBm@8% PER;
n mode:72.2M -72dBm@8% PER; 150M -70dBm@8% PER
ModulationMIMO-OFDM/OFDM/DSSS
LAN SettingStatic IP
Dynamic IP
DHCP ServerDHCP Server
Clients list
VPN Pass-ThroughPPTP
L2TP
Management ToolSNMP(v1&v2c)
Reboot
System Log
Firmware update
Time&Date Setting
Backup/Restore Configuration
Username Managerment
Diagnostic Tool(ping)
Others
Package ContentWireless N300 Ceiling Access Point W40AP
1*Mounting Bracket
1*Quick Installation Guide
1*Ethernet cable
1*Resource CD
1*Power Adapter
4*Screws
4*Plastic Bolt
Operating Temperature-10℃~45℃
Storage Temperature-30℃~70℃
Operating Humidity10%~90% non-condensing
Storage Humidity10%~90% non-condensing
Default SettingIP Address: 192.168.0.254
Login Username:admin
Login Password:admin
CertificationFCC/CE/RoHS

Firmware

W40AP V2.0.0.3_EN
W40AP V1.0 upgrade to V2.0
W40APV7.0 V2.0.0.11(2419)_EN
Date 20151216
Compatible with FCC standard.
What is new features of V2.0.0.11(2419)
1. separate wireless basic parameters and RF parameters management with AP controller
2. add RSSI limitation,client timeout,username and password options to AP management protocal
3. add management VLAN feature
4. enable high power output feature

Note:
After AP upgrade to this version, please also upgrade AP Controller CW500 or CW1000 to the lastest version.
CW500(V2.1.6.1(4147) or later)
CW1000(V2.0.6.3(4146) or later)
W40APV7.0 V2.0.0.12(2419)_EN
Date 20151216
Compatible with CE standard.
What is new features of V2.0.0.12(2419)
1. separate wireless basic parameters and RF parameters management with AP controller
2. add RSSI limitation,client timeout,username and password options to AP management protocal
3. add management VLAN feature
4. comply with CE Standard

Note:
After AP upgrade to this version, please also upgrade AP Controller CW500 or CW1000 to the lastest version.
CW500(V2.1.6.1(4147) or later)
CW1000(V2.0.6.3(4146) or later
W40APV7.0 V2.0.0.8(1209)_EN
1.Upgrade software platform to new one

2.Fix wifi security problem on second SSID when VLAN enabled.

3.Disable STP feature on APs

4.Improve the wireless throughput

5.Add Time Zone GMT +5:30

W40AP V1.0.5.3_EN
1.Incorrect upgrade will damage your device.
2.Do not power off the device when upgrading.
3.Please unzip the file you downloaded and use the file ended with "bin" or "trx" to upgrade your device.
W40AP V1.0.5.4_EN
1.Solve the problem of configuration loss ;
2.Add the rate patch;
3.Solved the problem of LAN IP address nation failure;
4.Change the default RF bandwidth to 20MHz.