W30AP Wireless N300 Wall Plate Access Point

W30AP is the latest generation wall plate wifi access point (AP) which can be installed in any 86mm wall plate without breaking the existing decorations and is easily be managed. It is well suited to university dormitories, hospital wards, hotel rooms and other sites with densely divided rooms.
Highlights
● Wall Plate Design
● One USB, one RJ11 and two RJ45
● Compliant with PoE 802.3af
● Tagging VLAN ID to SSID

W30AP is the latest generation wall plate wifi access point (AP) which can be installed in any 86mm wall plate without breaking the existing decorations and is easily be managed. It is well suited to university dormitories, hospital wards, hotel rooms and other sites with densely divided rooms.

Wireless N300 Speed

W30AP transfer rate up to 300Mbps on the 2.4GHz for faster file transfers and smoother video streaming.

Standard 86mm Panel Design

W30AP uses a standard 86×86mm wall plate design and leverage existing 86mm network panel cover.

Power over Ethernet (802.3af)

The port on the back panel support Power over Ethernet (PoE) function, which allows both power and data to be carried over s single Ethernet cable to W30AP.

USB Charger

W30AP provides a 5V/500mA USB charger output port, you can use your existing USB charging cable to charge most USB powered devices, like smartphone, MP3/MP4.

Advanced Wireless Security

W30AP offers multi-level wireless encryption options to prevent unauthorized access and protect your important data.
1. 64/128bit WEP, WPA-PSK, WPA2-PSK, WPA&WPA2-PSK, WPA, WPA2
2. Wireless Access Control based on the MAC address of wireless adapter

SSID to VLAN Tagging

W30AP can be configured to broadcast up to two SSIDs. Each SSID can be tagged to a specified network VLAN for different user access based on established access rights.

Centralized Management

W30AP can be managed by the hardware Access Controller, the administrator can monitor, manage and control the APs more easily.

Hardware Feature
Dimension86*86*35mm
Weight104.6g(173.6g include the package)
AP TypeFat AP
Interface2*FE LAN ports
1*RJ11 Telephone port
1*USBv2.0(Ipad not recommended)
Antenna2*omni-directional antennas
Button1*Reset
Power Method802.3af PoE
Maximum Power Consumption9W
LED IndicatorWiFi
Software Feature
Compliant StandardIEEE 802.11n/g/b
Frequency Range2.4GHz-2.483GHz
Maximum Wireless Speed300Mbps
EIRP<20dBm
Wireless Basic SettingMultiple SSID
Enable/Disable Wireless Radio
Wireless Client isolation
Wireless Access Control
Wireless Client list
SSID-to-VLAN Tagging
Wireless Security Setting64/128 WEP
WPA-PSK
WPA2-PSK
WPA&WPA2-PSK
WPA
WPA2
Working ModeAP,WDS,Universal Repeater
Receiver Sensitivityb mode:1M -92dBm@8% 11M -87dBm@8% PER;
g mode:54M -72dBm@8% PER;
n mode:72.2M -68dBm@8% PER; 150M -68dBm@8% PER
ModulationOFDM : BPSK@6/9Mbps、QPSK@12/18Mbps、16-QAM@24Mbps、64-QAM@48/54Mbps
DSSS : DBPSK@1Mbps、DQPSK@2Mbps、CCK@5.5/11Mbps
MIMO-OFDM : MCS 0-23
LAN SettingStatic IP
Dynamic IP
DHCP ServerDHCP Server
Clients list
VPN Pass-ThroughPPTP
L2TP
Management ToolSNMP(v1&v2c)
Reboot
System Log
Firmware update
Time&Date Setting
Backup/Restore Configuration
Username Managerment
Diagnostic Tool(ping)
Others
Package Content300M Wall Jack Fat Access Point W30AP
Quick Installation Guide
Ethernet cable
Two Screws
Resource CD
Operating Temperature-10℃~45℃
Storage Temperature-30℃~70℃
Operating Humidity10%~90% non-condensing
Storage Humidity10%~90% non-condensing
Default SettingIP Address: 192.168.0.254
Login Username:admin
Login Password:admin
CertificationFCC/CE/RoHS

Firmware

W30APV3.0 V2.0.0.3_EN
W30AP V1.0 upgrade to V2.0
W30AP V2.0.0.12(2562)_EN
Date 20151216
Compatible with CE standard.
What is new features of V2.0.0.12(2562)
1. separate wireless basic parameters and RF parameters management with AP controller
2. add RSSI limitation,client timeout,username and password options to AP management protocal
3. add management VLAN feature
4. comply with CE Standard

Note:
After AP upgrade to this version, please also upgrade AP Controller CW500 or CW1000 to the lastest version.
CW500(V2.1.6.1(4147) or later)
CW1000(V2.0.6.3(4146) or later
W30AP V1.0.3.9_EN
1.Solve the problem of configuration loss ;
2.Add the rate patch;
3.Add energy-saving mode;
4.Change the default RF bandwidth to 20MHz.