F1226P 24-Port Fast Ethernet+2*SFP Web-smart PoE Switch

F1226P is 24-port smart PoE switch with 2 GE ports, providing 24 10/100 Base-TX Ethernet ports, 2 10/100/1000 Base-T Ethernet ports and 2 1000Base-X SFP ports. 1-24 port supports IEEE 802.3af PoE(15.4W) or 802.3at PoE+(30W) standard and provides DC power and data signal transmission for AP, IP Phone and IP Camera through category 5 twisted pair. Support PoE management, VLAN, Link Aggregation,QoS, MAC address binding, to protect the users` networking privacy and provide DC power for remote devices. Less wire, easy installation and less time to optimize user` investment.
Highlights
● Power Over Ethernet up to 370 Watt
● Compatible with IEEE802.3af and 802.3at standard

F1226P is 24-port smart PoE switch with 2 GE ports, providing 24 10/100 Base-TX Ethernet ports, 2 10/100/1000 Base-T Ethernet ports and 2 1000Base-X SFP ports. 1-24 port supports IEEE 802.3af PoE(15.4W) or 802.3at PoE+(30W) standard and provides DC power and data signal transmission for AP, IP Phone and IP Camera through category 5 twisted pair. Support PoE management, VLAN, Link Aggregation,QoS, MAC address binding, to protect the users` networking privacy and provide DC power for remote devices.  Less wire, easy installation and less time to optimize user` investment.


Excellent PoE performance

1-24 port supports IEEE 802.3af PoE(15.4W) and 802.3at PoE+(30W) standard, PoE output full power up to 370W. Providing DC power and data signal transmission for AP, IP Phone and IP Camera through category 5 twisted pair.


Reliable industrial grade design                                   

Quality: Mean Time Between Failures--MTBF:100,000 hours
Stability: 64 byte packet, time delay less than 10ms, packet loss ratio: 0
Restorability: when network is not stable or error occurs, reboot time less than 10s
Normal operating: operating in -10 0C to 45 0C, device service time over 3 years


Flexible ports           

Providing 24 10/100Mbps autosensing ports, 2 10/100/1000Mbps autosensing RJ45 port 2*1000Base-X SFP ports and all port support wire-speed forwarding. Flexible ports make users to enjoy seamless connection


Green energy conservation design

Built-in advanced PoE chip with energy-conservation, ports can auto-switch to  energy-conservation status. Support smart fan system. Users can adjust the fan speed according to device temperature to reduce power consumption to reduce operation cost.

 

Excellent maintenance

Frontpanel switch design,  support auto-adjust and smart power management to setup the priority of power supply at your pleasure. Kinds of networking management such as Web and SNMP make easy maintenance.

 

Easy smart management         

Support easy management, such as QoS, Link Aggregation,VLAN, ACL etc to prevent MAC attack to make you enjoy a security networking.
 

Model No.F1226P
Description24-Port 10/100 PoE Smart Switch
Hardware
Standard and protocol supportedIEEE 802.3、 IEEE 802.3u、IEEE 802.3z、IEEE 802.3ab、IEEE 802.3x、IEEE 802.1D
IEEE 802.3af、IEEE 802.1Q 、IEEE 802.1p、IEEE 802.1x、IEEE 802.1W、SNMP、IGMP
Backplane bandwidth12.8Gbps
Linear-speed exchange on the second layerAll ports support
MTBF100,000hours
PerformanceStore and forwardYes
Exchange capacity8.8Gbit/s
MAC address entries4K
Support setting the maximum number of MAC addresses for learning
Port and moduleFixed Ports24 FE Ports
2 GE Ports
2 SFP (combo)
Optional modulesSFP modules
Optional power supplyPower supply moduleProviding 24 ports under IEEE 802.3af(15.4W) or 12 ports under IEEE 802.3at(30W)
PoE through 1 2 3 6 pin
Voltage input range100~240v
Dimension440*284*44mm(L*W*H)
Weight5kg
Total power consumptionAC input
<450W
PoE consumption up to 370W
Operating temperature0 ℃~40 ℃
Storage temperature-40 ℃~70 ℃
Relative humidity(Operational)10%~95%(noncondensing)
Relative humidity(Storage)10%~95%(noncondensing)
Software Feature
PoE managementSupport setup of PoE
Support power adjustable by priority
Support over temperature protection for PoE module
VLANSupport VLAN(4K) based on ports
Support 802.1QVLAN
MirroringSupport local mirror image
Link aggregationSupport LACP, manual link aggregation
Support up to 6 link aggregation groups and up to 8 GE ports per group
QoSSupport message transmission for ports and limitation of speed
Support SP & WRR
Layer 2 ring network protocolSupport STP/RSTP and looped Network for devices
MAC address managementSupport MAC aging, MAC filter, static MAC
MulticastSupport IGMP Snooping
Support IGMP V1/V2
Security featuresSupport management for user classification and password protection
Support IEEE 802.1X authentication
Port featuresSupport IEEE 802.1X flow control (Full duplex)
Support broadcast storm control base on ports
Support broadcast storm control based on PPS
Management and maintenanceSupport SNMP v1/v2
Support WEB-based management
Support cable detection
Support loopback detection for ports
Support system log, hierarchical alarm, debugging information output