AP340 Indoor Coverage Access Point

IP-COM 11n series AP(include AP325 and AP340 ) are enterprise-grade, high performance 11n Wi-Fi access points. Through the 802.11n Wi-Fi technology and enhanced transmit power and receive sensitivity, it can increase the scope of coverage, improve access density and operation stability.
Highlights
● Support 2.4Ghz 2x2 802.11n/g/b.
● Up to 300 Mbps data rate.
● Support 802.3af/at PoE standard.
● Deployed with IP-COM access controllers, support Captive Portal,etc.

IP-COM 11n series AP(include AP325 and AP340 ) are enterprise-grade, high performance 11n Wi-Fi access points. Through the 802.11n Wi-Fi technology and enhanced transmit power and receive sensitivity, it can increase the scope of coverage, improve access density and operation stability.  
Under the management and control of the IP-COM series AC, it support advanced functions like Access Control, Load Balancing, Seamless Roaming, Multiple Authentication Modes and so on, are ideal match for Small and Medium-Sized Enterprise offices, Hotels, and Primary Education Classroom.

Low-profile industrial design

With it sleek, low profile design and controllable LEDs, blends into hotel, office environments

Lower cost of implementation

Supporting PoE standard , AP can integrates into your existing 802.3af or 802.3at power and network infrastructure,

High performance

300Mbps wireless transfer rate, which is approximately 6 times faster than 802.11g, is ideal for scenarios like office, conference room, libraryetc.

Advanced Wi-Fi security

IP-COM AP support almost all the latest encryption and authentication mechanisms(such as WEP,WPA-PSK,802.1X,WEB Portal,Social login),make it simple for administrator to manage enterprise security and guest access.

Automatic RF optimization

Advanced RF optimization with automatic channel, power level selection,  to reduce interference. AP can recognize various channels being used and automatically switch to the best available channel to provide best experience for the users.

Dual Fat/Fit mode

When the network start small, user can acquire the AP and set it to Fat mode. As the user grows and more devices are installed, it's recommended to add a IP-COM AC to simplify network management and centrally manage all AP. It can significantly reduces deployment and management effort by automating device provisioning, firmware upgrades and policy enforcement.

Product Information
ModelAP340
MountingCeiling and Wall Mount
Dimensions200*200*30mm(W x H x L)
Application ScenariosSmall and Medium-Sized Enterprise offices, Hotels, and Primary Education Classrooms etc
Hardware Specifications
Frequency Bands2.4GHz
PHY data rates300Mbps
Wi-Fi StandardsIEEE 802.11n/g/b
Interfaces1*10/100/1000Mbps PoE/LAN port, 1*DC Power Jacket
Buttons1*RESET
Antennas2x Integrated 2.4GHz Omni-directional, 3dBi gain
Max Power Consumption13W
LED IndicatorsPWR, 2.4G
Power SupplyDC Input: 51 VDC 1.25A
PoE: 802.3at compliant
Receiver SensitivityMCS0: -88dBm
MCS7: -72dBm
Software Specifications
Operating ModeAP,WDS,Client+AP
WiFi RadioEnable or Disable
BSSIDs4
SSID HidingEnable or Disable
User IsolationSupport
Clients LimitConnected user number limitation for every SSID
VLANs802.1Q, 4094 VLAN IDs (1 to 4094) and SSID-based VLAN assignment
RSSI ThresholdSupport
WMM CapableSupport
Power Save (APSD)Support
Spectrum AnalysisSupport
Automatic channel controlSupport
Adjustable PowerAdjustable step by 1dbm
Access ControlConnect limitation based on mac address
Wireless Security64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2
DHCP ServerSupport
VPN Pass-ThroughPPTP,L2TP
Schedule RebootSupport
Page TimeoutSupport
Network DiagnosesPing
Time&Date SettingSupport
WiFi Client Association StatusSupport
System MonitoringStatus Statistic and Event Log
Backup ConfigurationSupport
Restore ConfigurationSupport
Reset DeviceSupport from Web UI or AP Controller
Username ManagementSupport from Web UI or AP Controller
Reboot DeviceSupport from Web UI or AP Controller
Firmware UpgradeSupport from Web UI or AP Controller
Centralized ManagementManaged by AC2000, AC3000
Working Environment
Operating Temperature-10℃~45℃
Storage Temperature-30℃~70℃
Operating Humidity10%-90% (non-condensing)
Storage Humidity10%-90%  (non-condensing)
Default Login IP192.168.0.254
Default User Nameadmin
Default Passwordadmin
CertificationsFCC/CE/RoHS

Firmware

AP340 Firmware V1.0.0.9(3307)_EN
Date 20160330
Compatible with FCC standard.
What is the new of version V1.0.0.9(3307)
1.Fix the login page redirect problem on the smartphone
2.Enable High power output feature
AP340 Firmware V1.0.0.10(3313)_EN
Date 20160330
Compatible with CE standard.
What is the new of version V1.0.0.10(3313)
1.Fix the login page redirect problem on the smartphone
AP340 V1.0.0.8(2861)_EN
Date 20160120
Compatible with FCC standard.
What is the new of version V1.0.0.8(2861)
1. add voucher authentication option into AP management portocal
2. enable high power output feature
AP340 V1.0.0.7(2850)_EN
Date 20160120
Compatible with CE standard.
What is the new of version V1.0.0.7(2850)
1. add voucher authentication option into AP management portocal
2. comply with CE standard